Knowledge of suction bag and vacuum packaging bag
1. Inspection of the quality of the pump: put the pump nozzle close to your face, and then pump air. If you feel suction, it means that the pump is good.
2. If there is swelling phenomenon in the evacuated bag, on the one hand, the quilts and other things in the bag will deflate, which will also reduce the vacuum degree; on the other hand, from the physical point of view, there is also a gap in the dense material. Due to the negative pressure, air molecules will "squeeze" into the bag as time goes on, and the vacuum effect will gradually decrease.
3. Leather and down products can be stored in this product, but not completely compressed.
4. Before the clothes are put into the collection bag, the wrapping paper or bag should be removed, otherwise the compression effect of suction bag will be affected.
5. Please dry the clothes in the bag. There is no need to use insect repellents, preservatives, etc., otherwise the purchased items will change color and deteriorate.
6. If there is a crack or a small hole is broken in the bag, ordinary wide edge transparent tape can be used to stick both sides of the bag tightly.
Expanding knowledge: common problems and solutions in intaglio printing with suction bag
The reasons for the appearance of scraper line or ink line are as follows: the scraper is worn or there is dirt on the scraper; the ink is mixed with impurities; the ink fineness is not enough; the printing plate is not well polished, too rough, and the ink viscosity is too high. Treatment method:
a) If the scraper line moves regularly with the left and right swing of the scraper, it can be judged that the scraper is worn or there is dirt on the scraper, and the bamboo stick can be used to remove the dirt at the position of the knife lifting line; if the scraper is worn, the scraper should be polished immediately or replaced with a new one. www.dgbpk.com/
Dongguan Beite packaging materials Co., Ltd
Dongguan special bag, plastic bag, plastic bag, plastic bag